Asalam-o-alaikum Wrwb!
Kaise hain aap sab??
Umeed hain theek honge.
kafi days k baad time nekal ker New Lesson k saath hazir hu.
InshAllah waqfe waqfe k baad new lessons post kerne ki koshish kerungi.
so last lesson humara jho k Patch Tool tha, ab usay tarteeb mei Humara Next Lesson Tool box k Clone Stamp Tool hain.
Let's Start the lesson:
[SHADOW=1]1: Clone Stamp Tool [/SHADOW]
things you have to do:
1: Photoshop mei aap apna Image open kare.
2: pir aap Tool Box mei Clone stamp tool select kare.
3: Aur brush size adjust kare jitna aap chaho, I'll go with 22 px.
4: Now Point the cursor at the image area you want to paint with, hold down [Alt] key, then mouse-click. and then release the button, You have just selected the source point for cloning.
5: and pir Hum copied pixels k zerye same image ka Duplicate dusre swing mei bana denge,
just paint it like a brush and serf vohi limited portion ko paint kerna hain jes mei yeh duplicate adjust hujae.
and see both look the same.
So that was all about Clone Stamp Tool!
[SHADOW=1]ab hum athe hain Clone Stamp Tool k Option Bar mei[/SHADOW]
Well Option bar mostly sabhe tools mei same he huti hain So es tool mei kafi options aapko praviouse lessons mei bhi bata chuke hu if your remember! but khair abhi pir se ek review kerte hain.
Mode:
aap jub clone tool k zerye koi source copy kerte hai tu yaha mode pe aap uskay different modes select kersakte hain like dissolve, lighten, color born etc... it depends on you if you choose them, but default option for Mode is Normal and its not neccessary to always use these option but you can use seldomly if needed.
Opacity and Flow:
donu options hamisha colors se related huti hain.
Ager Opacity 100% mei ho tu full colors mei aapka image hota hain, jaisa k image hain vaise he huti hain, and ager aap real image color se thora sa low color rakna chahte hain then esay aap decrease karsakte hain
and after cloning aapko duplicate object, low colors mei dekhenge.
the same as its showing in the image!
and the same Flow ka bhi option hain jho Image color k Strength se related hain.
100% mei ager ho tu same opacity k jaisa Normal full image view huti hain, but ager esay decrease karenge then image mei aapko color strength mei changes dekhegi so its not important, always to use it. just like mode option yeh bhi aapke choice pe depend kerta hain wether you use it or not.
Aligned:
yeh option as a default always selected (tick mark) huti hai.
Upper Clone stamp tool se abhi work kiya voh eske selected example mei aap note karsakte hain and jub deselect ho tu uska abhi aapko method mei bata the hu.
(((Aligned when it's Selected)))
Aligned select process mei jub aap clone tool k zerye koi source copy kerte hain and image k kessi portion mei usay paint karenge tu voh usay source ki duplicate paint hujayegi. jaise k uper ka procedure and see the Below image:
(((Aligned when it's DeSelected)))
jub Aligned deselect karenge tub aap Cloneing karenge tu ek mouse click mei pura duplicate bana sakte hain but jub mouse release ker k aap click karenge tu same first paint jho aap kiye the vohi pir se paint hujayegi means k continously same source jho k Aligned selected mode pe hosakte the es mei nai hugi, jitne new clicks kerte rahenge first click k copied pixels paint huti jayegi,
jub k ager selected options mei aap mouse ko hold on rakh e baghair new clicks bhi karenge tu same source he pura ka pura paint hugi.
I hope yeh point aap samajh gaye honge baki sab simple hain.
Use All Layers:
as a default yeh option tick mark nai huti.jub aapke image mei ek se zyada layers ho, tub jho selected layer hugi (jho k serf ek he layer pallete mei selected hugi) serf us pe clone tool ka work karta hain, tu image k serf ek he layer mei effects apply hugi jitne baki layers jho image mei hugi voh sab lock hujayenge and koi changes us pe apply nai hugi and tub yeh Clone method bhi aap sahi se apply nai ker payenge tu us dauran sabhe layers mei yeh effect apply hune k lie pir aap use All layers option ko tick mark kare then normally sabhe layers pe clone tool like just a 1 layer applied hugi. thats it..
Any question if you have drop it through comment Box..
Kaise hain aap sab??
Umeed hain theek honge.
kafi days k baad time nekal ker New Lesson k saath hazir hu.
InshAllah waqfe waqfe k baad new lessons post kerne ki koshish kerungi.
so last lesson humara jho k Patch Tool tha, ab usay tarteeb mei Humara Next Lesson Tool box k Clone Stamp Tool hain.
Let's Start the lesson:
[SHADOW=1]1: Clone Stamp Tool [/SHADOW]
things you have to do:
1: Photoshop mei aap apna Image open kare.
2: pir aap Tool Box mei Clone stamp tool select kare.
3: Aur brush size adjust kare jitna aap chaho, I'll go with 22 px.
4: Now Point the cursor at the image area you want to paint with, hold down [Alt] key, then mouse-click. and then release the button, You have just selected the source point for cloning.
5: and pir Hum copied pixels k zerye same image ka Duplicate dusre swing mei bana denge,
just paint it like a brush and serf vohi limited portion ko paint kerna hain jes mei yeh duplicate adjust hujae.
and see both look the same.
So that was all about Clone Stamp Tool!
[SHADOW=1]ab hum athe hain Clone Stamp Tool k Option Bar mei[/SHADOW]
Well Option bar mostly sabhe tools mei same he huti hain So es tool mei kafi options aapko praviouse lessons mei bhi bata chuke hu if your remember! but khair abhi pir se ek review kerte hain.
Mode:
aap jub clone tool k zerye koi source copy kerte hai tu yaha mode pe aap uskay different modes select kersakte hain like dissolve, lighten, color born etc... it depends on you if you choose them, but default option for Mode is Normal and its not neccessary to always use these option but you can use seldomly if needed.
Opacity and Flow:
donu options hamisha colors se related huti hain.
Ager Opacity 100% mei ho tu full colors mei aapka image hota hain, jaisa k image hain vaise he huti hain, and ager aap real image color se thora sa low color rakna chahte hain then esay aap decrease karsakte hain
and after cloning aapko duplicate object, low colors mei dekhenge.
the same as its showing in the image!
and the same Flow ka bhi option hain jho Image color k Strength se related hain.
100% mei ager ho tu same opacity k jaisa Normal full image view huti hain, but ager esay decrease karenge then image mei aapko color strength mei changes dekhegi so its not important, always to use it. just like mode option yeh bhi aapke choice pe depend kerta hain wether you use it or not.
Aligned:
yeh option as a default always selected (tick mark) huti hai.
Upper Clone stamp tool se abhi work kiya voh eske selected example mei aap note karsakte hain and jub deselect ho tu uska abhi aapko method mei bata the hu.
(((Aligned when it's Selected)))
Aligned select process mei jub aap clone tool k zerye koi source copy kerte hain and image k kessi portion mei usay paint karenge tu voh usay source ki duplicate paint hujayegi. jaise k uper ka procedure and see the Below image:
(((Aligned when it's DeSelected)))
jub Aligned deselect karenge tub aap Cloneing karenge tu ek mouse click mei pura duplicate bana sakte hain but jub mouse release ker k aap click karenge tu same first paint jho aap kiye the vohi pir se paint hujayegi means k continously same source jho k Aligned selected mode pe hosakte the es mei nai hugi, jitne new clicks kerte rahenge first click k copied pixels paint huti jayegi,
jub k ager selected options mei aap mouse ko hold on rakh e baghair new clicks bhi karenge tu same source he pura ka pura paint hugi.
I hope yeh point aap samajh gaye honge baki sab simple hain.
Use All Layers:
as a default yeh option tick mark nai huti.jub aapke image mei ek se zyada layers ho, tub jho selected layer hugi (jho k serf ek he layer pallete mei selected hugi) serf us pe clone tool ka work karta hain, tu image k serf ek he layer mei effects apply hugi jitne baki layers jho image mei hugi voh sab lock hujayenge and koi changes us pe apply nai hugi and tub yeh Clone method bhi aap sahi se apply nai ker payenge tu us dauran sabhe layers mei yeh effect apply hune k lie pir aap use All layers option ko tick mark kare then normally sabhe layers pe clone tool like just a 1 layer applied hugi. thats it..
Any question if you have drop it through comment Box..